SEARCH

The Hearing-Aid Industry W…
GeneralThe Hearing-Aid Industry Will Never be the…09-11
GeneralProviding Support When it is Needed Most…09-11
GeneralStreamics is Just What the Doctor Ordered…09-11
GeneralMaterialise Helps Kick Off RAPID 2012…09-11
GeneralIris Van Herpen’s “Hybrid Holism” Unvei…09-07
GeneralMaterialise helps Jaguar realise concept c…09-07
GeneralMaterialise contributes to Pininfarina con…09-07
GeneralMaterialise helps Tupperware to save time …09-06
Stereoscopic 3D
Head Mounted Displays
3D Input Devices
Exotic Displays
Motion Capture/Tracking
VR Gloves
Force Feedback/Haptics
3D Scanning/Digitizing
3D Printing
Software Tools
Graphics Cards
Misc Products
Position: SouVR >> CaseStudy >> FAQ  Online:
xsens more>> 
Why is the orientation incorrect?  
Most likely the orientation errors you are reporting are caused by exceeding the specified range of the gyroscopes.
[2012-6-28] 
What kind of anti aliasing (low-pass) filters are used  
To avoid aliasing the Motion Tracker uses analog low-pass filters on all inertial data channels (not on the temperature sensors and magnetometers).
[2012-6-28] 
What is the measurement range of the MTi?  
The Xsens Motion Trackers contain accelerometers, gyroscopes, magnetometers and some also contain barometers (MTi-G, MTw).
[2012-6-28] 
What is the influence of metals and magnetic fields  
The Xsens orientation algorithm (XKF) uses earth's magnetic field as a global reference for North / heading (just like a compass).
[2012-6-28] 
What is the difference?  
The leaflet states the in-run bias stability which is the bias stability during operation. The in-run bias stability is 20 deg/h.
[2012-6-28] 
IO2 more>> 
IO2 Heliodisplay  
These questions and answers apply to the Heliodisplay and not necessarily to our fundamental technology, nor any other systems developed by IO2.
[2009-8-7] 
ARC Science more>> 
What is the life and cost of the lamps?  
Depending upon the projector, they are generally rated at 1500 to 2000 hours in standard power mode, and as much as 4 times that in the economy mode (low brightness setting) available with some projectors.
[2009-8-19] 
What hardware do the movies and images play from?  
A PC configured for good video performance. The software, images and movies will reside on the hard disk. The PC generally resides inside the base of the display system, although it can also reside in the kiosk or some other location close by.
[2009-8-19] 
Can movies have audio?  
Yes. Audio is easily added to movies.
[2009-8-19] 
Can we have multiple movies or images on our OmniGlobe?  
Yes. And they can be set up to be selected by visitors or staff. Visitor selection is typically accomodated using a touch screen monitor. Movies can also continuously loop.
[2009-8-19] 
Who besides ARC creates content?  
Anyone can. As discussed on our "Creating Content" page, content can be as simple as a 2:1 rectangular global image (we prefer 3000x1500 pixel JPG's).
[2009-8-19] 
Intricad more>> 
Does intricad scanning for specialized applications?  
as long as your market is not already claimed by another customer
[2010-11-29] 
Can I scan using a green laser?  
in some cases this may offer better scanning results than a red laser
[2010-11-29] 
Can you make a scan using a webcam?  
obviously the level of detail will be less than for a video camera
[2010-11-29] 
What types of object shapes can be scanned?  
Cylindrical shaped objects work best. Other shapes are possible but may require more post processing to complete. Still, the scanner's true merit is in its ability to scan around an object and thereby gather a significant amount of data regarding the overall shape in a single pass.
[2010-11-29] 
Why can you purchase the scanner software separately?  
In case a larger or smaller size turntable is required. The manuals provide sufficient information to build your own turntable
[2010-11-29] 
Magnetic more>> 
What is the extent of the Magnetic network?  
Content created for our screens can play on any screen in any network.
[2009-8-31] 
What are the viewing distances for your 3D displays?  
Minimum viewing distance for 32”=3’, 42”=5’, 47”=6’
[2009-8-31] 
How much pop effect should I get with your 47" Display?  
Our 47” screen has 8 inches of pop and 8 inches of depth totaling 16” cubed.
[2009-8-31] 
Does it work on the Newsight 8 quadrant method?  
The 8 quadrant method that Newsight uses has major flaws because of the destructive compression it does to the 3D files.
[2009-8-31] 
And is it based on the same in screen interpolation from  
We have explored this method and may eventually add a 2D+ feature at some point
[2009-8-31] 
Holografika more>> 
For what applications did you already install Holovizio units?  
Holovizio 3D displays are already proved to be successful in tradeshow environments for displaying general 3D images.
[2009-9-9] 
Is there any stress increasing factor in case of continuous using?  
No, there are no such factors. Compared to stereoscopic/autostereoscopic and other 3D displaying solutions where the user has to wear special head-gear or is positioned or tracked .
[2009-9-9] 
Is it possible to address X, Y ‚ Z coordinates of a voxel directly in the real space?  
Yes, if you use 3D texturing.
[2009-9-9] 
CAD / Modeling applications  
"Using the export-and-display approach, you can view models exported from numerous CAD / Modeling applications. Below we have listed several software packages that we have tested with HoloVizio.
[2009-9-9] 
How can we display our 3D sowftware's data on HoloVizio systems?  
"The solution for integrating existing applications with HoloVizio is our OpenGL Wrapper which intercepts OpenGL calls coming from the application and tranfers them to the HoloVizio 3D display.
[2009-9-9] 
ES more>> 
How does a worldwide release date work in the planetarium world?  
We will ship the marketing materials several months in advance of the scheduled release date so that you can begin promoting the show in your theater.
[2009-9-9] 
What materials will I receive to help me promote the show?  
The electronic marketing kit includes print-ready movie poster artwork
[2009-9-9] 
Is “gate share” pricing ideal for every theater?  
Surprisingly, no. Gate share pricing is most beneficial for larger commercial theaters that have a higher audience throughput and depend on ticket sales as a key source of revenue.
[2009-9-9] 
How does the "gate share" pricing work?  
We will charge a small initial distribution fee, which covers packaging the show and the marketing materials that we will send to your theater.
[2009-9-9] 
What is Feature Presentations?  
Feature Presentations is a subscription service that offers two new full-dome shows for your theater each year from E&S Digital Theater Productions.
[2009-9-9] 
Point Grey more>> 
ProFUSION 25 frequently asked questions  
This article answers some frequently asked questions about the ProFUSION camera array system offered through Point Greys Japanese distributor, ViewPLUS Inc.
[2009-9-9] 
Right-angled 1394 Firewire cables.  
This article presents some suggestions on where to purchase different-angled 1394 Firewire cables.
[2009-9-9] 
Setting Gap Count for Long Cables  
This article explains how to set automatic or manual gap count in the Windows registry when using a FireWire camera with a cable longer than the IEEE-1394 standard of 4.5 meters.
[2009-9-9] 
How much do your software packages and software development kits (SDKs) cost?  
Our software packages and software development kits are included free of charge with the purchase of a camera.
[2009-9-9] 
Important information for new or potential customers.  
This article is intended to provide new or potential customers with key product and sales information and answer some of the most commonly asked technical questions regarding Point Grey products.
[2009-9-9] 
Heliodisplay more>> 
Interactive--will it work with Linux or a Mac?  
The drivers are only compatible with Win2000, XP and Vista platforms.
[2009-9-9] 
Can I put it in a floor?  
No. You cannot have people walking over the device. You can however have it placed inside a pedestal, side-mounted in a wall, or hanging from above.
[2009-9-9] 
Can the moisture damage my office?  
The amount emitted is so minimal that in a standard room, it may affect the environment by about tenths of a percent or in a large room by one hundredth of a percent, or the equivalent of adding another person into a room.
[2009-9-9] 
Can I use it without the interactivity?  
Just disable the checkbox.
[2009-9-9] 
What programs will it work with (3DStudio, Quicktime etc?)  
The system supports all those formats compatible with Win2000, XP and Vista platforms.
[2009-9-9] 
Novint more>> 
Is the Falcon only for first-person shooting games?  
No. We offer a variety of games, from sports to puzzles to adventure and more. Please visit our website to see a list of all of our games:
[2009-9-16] 
Is the Falcon fast or precise enough for hardcore or competition gaming?  
Gamers who play in competitive environments such as the TeamWarfare League are often curious about the Falcon's performance in terms of speed and precision.
[2009-9-16] 
Does the Falcon work with any game?  
We plan to release our F-Gen drivers shortly, which will let the Falcon work with any game. The F-Gen drivers emulate a mouse, and are customizeable, granting you the ability to adjust the movement scales for the Falcon's control, and save settings for various games.
[2009-9-16] 
Certain menu items in N VeNT are grayed-out or non-functioning?  
No. The menu options that are grayed-out are features that will be implemented in the future.
[2009-9-16] 
What is the size of the box that the Falcon comes in?  
The measurements of the Falcon Box are below.
[2009-9-16] 
3D Connexion more>> 
The buttons of my 3D mouse are not working  
The SpacePilot, SpacePilot PRO, SpaceTraveler, SpaceExplorer and SpaceNavigator 3D mice have a plug-in for Pro/E called "3Dconnexion Plug-In for Pro/ENGINEER" or "3DxProENGINEER" for short.
[2009-9-24] 
3D mouse support in Pro/ENGINEER Wildfire 2.0 64-bit (x64)  
Pro/ENGINEER Wildfire 2.0 64-bit (x64) has partial support for 3Dconnexion devices. Full support on 64-bit was added in Pro/ENGINEER Wildfire 3.0 in April 2006.
[2009-9-24] 
Installation of "3Dconnexion Add-In for SolidWorks"  
Issue:Installation of the 3Dconnexion Add-In for SolidWorks fails with error 1603
[2009-9-24] 
The Button Mapping panel in Solid Edge  
This article applies to Solid Edge V20 or earlier.
[2009-9-24] 
3D Mouse does not work in a parallel viewport in Rhinoceros 3D  
Issue:The 3D Mouse does not roll or spin the model in a parallel viewport of Rhino.
[2009-9-24] 
Ascension more>> 
When should I start thinking about incorporating  
During the development stage, if possible.
[2009-9-27] 
Can Ascension customize a tracker to my needs?  
Yes. Ascension has a long and successful record of modifying tracker configurations to meet stringent medical requirements.
[2009-9-27] 
Is it true that magnetic trackers are hard to use in  
Yes, they can be, especially if the technology is first generation vintage. In the last 10 years many medical device manufacturers have evaluated these early trackers and found them inadequate, usually because of accuracy distortion and improper placement.
[2009-9-27] 
Are all magnetic trackers about the same?  
No, there are several generations of trackers on the market.
[2009-9-27] 
What should I look for when choosing a medical tracker?  
First, seek a company that focuses on developing medical tracking products and presents a robust record of bringing products to market.
[2009-9-27] 
Animazoo more>> 
What is Inertial Gyro Motion Capture Systems?  
Animazoo Gyroscopic systems use tiny inertial gyroscopes that are attached to an actor’s body. These directly record the rotations of the actor’s body parts.
[2009-9-27] 
What is Electromechanical Motion Capture Systems?  
Animazoo mechanical systems track body joint angles directly and are often referred to as exo-skeleton mocap systems, due to the way the sensors are attached to the body.
[2009-9-27] 
What is Optical Motion Capture Systems?  
Triangulate the 3D position of a marker between one, two or more cameras that have been pre-calibrated for distance to provide overlapping projections. Tracking a large number of markers or multiple performers is
[2009-9-27] 
What is Magnetic Motion Capture Systems?  
Calculate position and orientation by measuring the relative magnetic flux of three orthogonal coils on both the transmitter and each receiver. Magnetic systems require only two-thirds the number of markers compared to optical systems.
[2009-9-27] 
What is motion capture?  
Motion capture, or Mocap, is a technique for digitally recording movement. Originally used as an analysis tool for biomechanics, mocap is now successfully employed in a wide variety of sectors including games development, advertising, events and education.
[2009-9-27] 
eMagin more>> 
Glossary of Terms in eMagin  
Augmented Reality refers to a display in which simulated imagery, graphics, or symbology is superimposed on a view of the surrounding environment
[2009-10-10] 
Why OLED on Silicon?  
As with any active matrix display, each pixel is activated directly so that a corresponding circuit delivers current to the cathode and anode materials, stimulating the OLED materials and causing them to emit light.
[2009-10-10] 
Why OLED?  
Because OLED structures emit their own light, they feature several appealing performance characteristics.
[2009-10-10] 
What is eMagin OLED-on-Silicon Microdisplays?  
Easy to view, compact, and low power, OLED microdisplays enable the high-quality near-eye viewing that enable portable computing for military, industrial, medical, and entertainment applications.
[2009-10-10] 
What is Virtual Imaging?  
eMagin OLED-on-Silicon Microdisplays & Virtual Imaging ,Easy to view and compact – with industry-leading power efficiency
[2009-10-10] 
Vuzix more>> 
Can I use a different audio system instead of  
Can I use a different audio system instead of, or in conjunction with, the iWear VR920?
[2009-10-10] 
Tracking and/or 3D Stereoscopy does not work?  
Tracking and/or 3D Stereoscopy does not work in my favorite game. What can I do?
[2009-10-10] 
Will the iWear VR920 work with any game, or only  
There are three aspects of game or application compatibility: functioning as a monitor, providing 3D stereoscopic video and offering tracking support.
[2009-10-10] 
Will the iWear VR920 work for users wearing prescription eyeglasses?  
The optics and VR920 platform have been designed to fit over top (in front) of glasses. Its optics also addresses and alleviates the issues normally associated with astigmatism.
[2009-10-10] 
How does the VR920 accommodate different head  
The iWear VR920 is designed with these and several other ergonomic factors in mind.
[2009-10-10] 
Immersion more>> 
I get the message "can't connect to device."?  
Manikin is powered off or the USB cable is not connected to the PC.
[2009-10-10] 
Simulation freezes or becomes erratic?  
Snare is plugged in but not completely seated. Either remove the snare or plug it in completely.
[2009-10-10] 
When using the snare in a procedure I see no tool.  
No tool was selected. Go to accessories and select a tool.
[2009-10-10] 
During EGD the scope tube seems to pushing  
Anatomy face plate is misaligned. Try removing and reinstalling the face plate.
[2009-10-10] 
When stepping on the foot pedal I get no response  
Foot pedal is plugged into the wrong jack. For a single foot pedal plug into the lower jack.
[2009-10-10] 
InSpeck more>> 
Is there anything we can do to eliminate this problem?  
I have previously worked with different 3D digitizers and I find that the InSpeck's data is very dense. When the data was imported into other 3D packages, I had trouble working with it.
[2009-10-19] 
Can I capture hair with an InSpeck digitizer?  
Yes. Because of the underlining technology (censor's wide dynamic range) and techniques used to capturer 3D information, hair is no problem.
[2009-10-19] 
Does InSpeck offer a complete turnkey solution for the  
InSpeck's expertise lies with 3D hardware and 3D software. We have been manufacturing optical, non-contact, 3D digitizers (3D cameras) for over 10 years now.
[2009-10-19] 
Is it possible to digitize an entire human body?  
Yes. InSpeck offers 2 main solutions, each with different possible configurations.
[2009-10-19] 
What data formats are supported by InSpeck's software?  
InSpeck's software currently supports BMP, TIF, TGA, PIC, 3DS, DXF, VRML, HRC (Softimage), HRC with NURBS, Maya and Maya with NURBS, STL, ASCII and EM's proprietary format, SZE.
[2009-10-19] 
PhaseSpace more>> 
Can the system capture something traveling as fast as a bat?  
We would like to use the PhaseSpace system as part of a baseball batting trainer. Can the system capture something traveling as fast as a bat?
[2009-10-19] 
Why is it important to capture motion data at a rate higher than  
PhaseSpace processes motion capture data in real-time allowing you to stream to your preferred viewing software (PhaseSpace Viewer, third party software, such as Kaydara MOCAP™,
[2009-10-19] 
Can I use the PhaseSpace system to improve the user interface  
Can I use the PhaseSpace system to improve the user interface with Head Mounted Display augmented reality?
[2009-10-19] 
Can I use the PhaseSpace system instead of the  
I am a game developer. Can I use the PhaseSpace system instead of the keyboard, mouse and joystick?
[2009-10-19] 
Could we use the PhaseSpace system?  
We are looking for a way to accurately control a robot in a hazardous environment. Could we use the PhaseSpace system?
[2009-10-19] 
SensAble more>> 
can they just deploy on OHAE?  
Commercial organizations deploying an application, whether to a university or to another commercial organization, must get a deployment agreement from Sensable.
[2012-3-22] 
Can that company use OHAE?  
Commercial organizations may not use OHAE.
[2012-3-22] 
What if a commercial customer is using OHAE?  
a violation of the software license.
[2012-3-22] 
Is OHAE available for Linux and Mac OS X?  
OHAE is available for OS X and for supported distributions of Linux.
[2012-3-22] 
can they get a refund on the commercial version?  
can they get a refund on the commercial version of the OpenHaptics toolkit they purchased?
[2012-3-22] 
Vicon more>> 
How does boujou correct for the effects of lens distortion?   Hot
Yes, but only if they occupy more than about 20% of the image area. You will need to tell boujou to track the moving object instead of the background by creating a mask to hide everything apart from the object.
[2009-10-19] 
Using the camera path smoothing tool  
The camera path smoothing tool in boujou can smooth out spikes and noise in the camera path while maintaining the correspondence between the camera and the 3D points.
[2009-10-19] 
What's the best way of tracking a shot with variable lighting and flashes?  
If you are using boujou 2 or bullet 1 then use the Deflicker option in the Advanced Feature Tracking Properties dialog. Deflicker will compensate for localised changes in lighting within an image, and also between frames.
[2009-10-19] 
I have not received any download details following  
Check that you have given a valid email address when you entered your details.
[2009-10-19] 
What is the difference between silver bullet and bullet SD?  
The main difference between silver bullet and bullet SD is the fact that bullet SD will not allow you to import footage that has a resolution greater than 800x600.
[2009-10-19] 
Virtual Research more>> 
The FS5i is compatible with which platforms?  
The FS5i HMD is compatible with the following platforms:
[2009-10-27] 
The FS5 HMD is compatible with which platforms?  
The FS5 HMD is compatible with the following platforms:
[2009-10-27] 
The V4 HMD is compatible with which platforms?  
The V4 HMD is compatible with the following platforms:
[2009-10-27] 
The V6 HMD is compatible with which platforms?  
The V6 HMD is compatible with the following platforms:
[2009-10-27] 
The V8 Binoculars is compatible with which platforms?  
The V8 Binoculars is compatible with which platforms?
[2009-10-27] 
Visbox more>> 
What about Visbox Open-source software?  
A large part of Visbox, Inc's research involves evaluating the newest in digital projection technology. Most of the advances
[2009-10-27] 
What about Visbox PC graphics hardware?  
Visbox, Inc.'s products are available as either standalone displays or as turn-key solutions with graphics hardware and pre-installed software
[2009-10-27] 
What about Visbox Structures and Enclosures?  
Visbox, Inc. builds custom enclosures and structures for its products. Of particular interest are the enclosures for the VisBox
[2009-10-27] 
What about Visbox 3D Stereo Methods?  
For immersive 3D displays, Visbox makes use of several 3D stereo methods including linear polarization, circular polarization, Infitec, and active stereo
[2009-10-27] 
What about Visbox Projector Positioners?  
Visbox, Inc. specializes in precise projector positioning. In order to achieve a seamless display with our VisWall product, we have developed a custom 6 DOF
[2009-10-27] 
WorldViz more>> 
WorldViz Knowledge Base:Modelling a simple room using 3ds Max  
Use 3ds Max to create a simple model of the interior of a room that you can load in Vizard. To do this yourself all you
[2009-10-27] 
WorldViz Knowledge Base:Hierarchical Models – From 3ds Max to Vizard  
Models that you use in Vizard can have a hierarchy of sub-parts that are linked through parent/child type relationships
[2009-10-27] 
WorldViz Knowledge Base:Creating a toon effect in 3ds Max  
Watch the video tutorial in this article to learn how to add a black border around a model in 3ds Max
[2009-10-27] 
WorldViz Knowledge Base:Anark to Vizard workflow  
This article describes how to use Anark to convert a CAD model to a Vizard compatible model format
[2009-10-27] 
WorldViz Knowledge Base:Light Baking in 3ds Max  
Baking refers to using a program such as 3ds Max to create a texture map based on some aspect of the scene
[2009-10-27] 
3D Digital more>> 
Is there a color texture option?  
Yes. We offer a color texture option for an additional cost.
[2009-11-9] 
Can the scanner scan shinny, or dark objects?  
Yes. However, to get a more accurate scan we recommend that you coat the object in a chalk powder, or anything to reduce the reflectivity
[2009-11-9] 
Does it work with both 110 and 220 voltages without the need for a converter?  
Yes. The power pack can work with both 110 volts and 220 volts without a problem.
[2009-11-9] 
Is it compatible with Solidworks and other solid modeling programs?  
Yes. The EScan can save multiple file formats and therefore can be used with a multitude of solid modeling programs.
[2009-11-9] 
What is the learning curve for the EScan?  
As suggested in the last question there is a very short learning curve. The software is easy to understand. Our customer reviews have told us
[2009-11-9] 
Christie more>> 
Maintenance of a Digital Cinema Projector - Optical Care  
Unnecessary cleaning of optics can be more harmful than helpful, increasing the risk of degrading delicate coatings and surfaces
[2009-11-9] 
Maintenance of a Digital Cinema Projector - Lamp Change  
The adjustment of image size by means of a zoom lens.
[2009-11-9] 
Maintenance of a Digital Cinema Projector - Electrical  
Every 60 days or 500 hours of operation you should check the contact surfaces of the projector for cleanliness and that the electrical and lamp connections are tight. Clean electrical
[2009-11-9] 
Maintenance of a Digital Cinema Projector - Ventilation  
Vents and louvers in the projector covers provide ventilation, both for air intake and exhaust. Never block or cover these openings
[2009-11-9] 
Maintenance of a Digital Cinema Projector - Liquid Cooling  
The CP2000 high-intensity lamp and electronics rely on a variety of cooling components to reduce internal operating temperatures
[2009-11-9] 
EyeTech more>> 
Video is all black or gray  
Symptoms Black or gray image is displayed.
[2009-11-9] 
"Jumpy" Mouse Cursor  
Symptoms The mouse cursor “jumps” around the area the user is looking.
[2009-11-9] 
16 Bit Windows Error  
Symptoms A distorted or split image is displayed.
[2009-11-9] 
Error Reading Serial Number  
Symptoms“Error Reading Serial Number” is displayed when Quick Glance is opened.
[2009-11-9] 
Video is split or distorted  
Symptoms A distorted or split image is displayed.
[2009-11-9] 
FARO more>> 
What is a laser scanner?  
Devices which lead the laser beam are called laser scanner. There are laser scanner heads which can be attached to measurement arms or traditional CMMs for the
[2009-11-18] 
What is laser scanning?  
Laser scanning means that surfaces or 3D forms are swept over in a horizontal or grid pattern with a laser beam to measure or process these or to generate a 3D picture
[2009-11-18] 
What is a tracker?  
A tracker is a measurement device that incorporates rotary encoders and a laser distance measurement in a closed-loop control system to track and measure
[2009-11-18] 
What is a measurement arm?  
A measurement arm is a multi-axis articulated portable measurement system used for a variety
[2009-11-18] 
What means OMV?  
On Machine Verification describes a method of inspection used on a machine tool to check the part which has just been produced. This is a widely used method but
[2009-11-18] 
I-O Displays more>> 
Can the NuView Adapter be used with “film” type cameras?  
No. The NuView Adapter will work only with analog or digital Video cameras.
[2009-11-18] 
Can the NuView Adapter be used to take stereoscopic still photographs?  
No. The NuView Adapter is strictly for shooting stereoscopic 3D Video.
[2009-11-18] 
How do I edit the video I shoot with the NuView Adapter?  
You may edit the video shot with the NuView Adapter using any standard editing method or software.
[2009-11-18] 
Will the NuView Adapter work with both analog  
Yes. The NuView Adapter will work with both analog and digital camcorders, as long as the
[2009-11-18] 
Will the NuView Adapter work with my camcorder?  
The NuView Camcorder Adapter comes with adapter rings to fit 37mm, 43mm and 49mm filter
[2009-11-18] 
NewSight more>> 
What is better, MultiView or 2D plus depth?  
When using 3D rendering software, you should always use the MultiView approach. This will result in best possible images
[2009-11-18] 
How can I determine whether the image is shown  
Properly done outscreen images should move in the opposite direction of the observer. Contents inside the screen should
[2009-11-18] 
What will happen if an object cuts the screen border?  
If the object is located inside the screen (behind the screen glass), it will even enhance the depth perception. But it is always
[2009-11-18] 
How can I design impressive 3D images?  
The human brain will perceive 3D information better if the scene is comprised of clearly different depth structures. If a 3D
[2009-11-18] 
What is the purpose of the NewSight plugin?  
The NewSight plugins replace the camera in the scene being animated. When rendering the scene, multiple videos are produced
[2009-11-18] 
DepthQ more>> 
Who uses the DepthQ® projector?  
Fortune 500 companies, governments, major universities from Beijing to Munich
[2009-11-19] 
What companies were involved, and how did the  
Three companies were involved in the creation of the DepthQ® HD 3D projector: Lightspeed
[2009-11-19] 
What power modes does DepthQ® support?  
DepthQ® has an auto-switching power supply and 100V – 240V at 50 –- 60 Hz.
[2009-11-19] 
Can I invert the projected image?  
Yes. DepthQ® can be used in any standard projection mode: front, rear, and ceiling mount
[2009-11-19] 
Does DepthQ® support 3D composite video data from  
No.
[2009-11-19] 
Planar more>> 
PX212M PIP information  
How do I set up PIP to work on the PX212 display?
[2009-11-23] 
Plasma displays and network connection.  
How can I connect my Plasma display to the network?
[2009-11-23] 
Viewing angle of LCD TVs compared to CRT TVs  
How does the viewing angle of the Planar LCD TV compare with the standard CRT TV?
[2009-11-23] 
Replaced EL640.400CE5 with CD4  
We recently implemented the 640.400-CD4 display in place of the -CE5 as recommended by PLANAR. This appeared to be a relatively easy exchange. However, the luminance is a problem. the -CE5 with a given white screen gives us about 18 nits in our system. All things being the same, the -CD4 only measures about 5 nits. This is obviously an undesireable difference. What can we do to improve this? Was the -CD4 a good recommendation?
[2009-11-23] 
PX212M monitor have a black box at the upper left-hand corner.  
Why does my PX212M monitor have a black box at the upper left-hand corner? When I connected it to my G-Force FX 5200 video card and changed resolution from 800x600 to 1600x1200, the box was still there but it got smaller. How do I get rid of that box?
[2009-11-23] 
Z Corporation more>> 
Can I machine the castings produced?  
Yes. The cast metal part will have similar metallurgical characteristics as metal parts made using conventional
[2009-11-23] 
What is the tolerance and surface finish that can be  
Customer parts produced have yield results that mimic traditional sand casting finishes and
[2009-11-23] 
Will the printers need to be modified to work for this application?  
The ZPrinter 310 Plus and Spectrum Z510
[2009-11-23] 
Will this capability be available on all Z Corp. machines?  
The material is available for all of Z Corporation’s current systems, the ZPrinter 310 Plus and the Spectrum
[2009-11-23] 
What metals can be cast?  
ZCast 501 is a powder of set that allows casting of aluminum and other lower temperature metals like zinc
[2009-11-23] 
Projection Design more>> 
Why is it important to have higher resolutions?  
Higher resolution is extremely important in many applications, for instance medical imaging and oil- and gas exploration
[2009-12-4] 
What is stereoscopic imaging, and can  
Stereoscopic imaging is mostly used for visualisation, for instance within medical imaging, oil and gas exploration
[2009-12-4] 
In what applications is it important for a  
Many applications require 24/7 operation, for instance control rooms for mission critical manufacturing
[2009-12-4] 
Why do projectiondesign feature both DVI and  
We feel that the rigid construction of the DVI connetor is much better than the fragile HDMI connector, especially
[2009-12-4] 
What is HDCP?  
HDCP – High bandwidth Digital Contents Protection – is an encryption standard used to encrypt DVI
[2009-12-4] 
Zalman more>> 
My motherboard has a 4-pin fan connector .  
This problem usually occurs for Intel motherboards with 915P or newer chipsets. The housing of the
[2009-12-10] 
Is it possible to control CNPS9500 AT's fan speed ?  
The CNPS9500 AT is equipped with a PWM fan that has automatic fan RPM control feature. Thus, the cooler's fan RPM can only be controlled by a motherboard that supports the PWM feature
[2009-12-10] 
Diifference between the the CNPS9500 ?  
The difference between the CNPS9500 LED and the CNPS9700 LED lays in the sizes of the product (heat sink/pipe and
[2009-12-10] 
Can Socket 775 Supports for the CNPS7000 and the CNPS7700 be used interchangeably?  
The size and weight of these two products differ, resulting in different installation methods therefore, the Socket 775 Supports
[2009-12-10] 
What are the main difference between the CNPS9700 LED and the CNPS9700 NT?  
"""Cooling performance: There is no difference in cooling performance for the CNPS9700 LED and CNPS9700 NT.
[2009-12-10] 
Headplay more>> 
  • 此栏目下没有
  • Tobii more>> 
    There is no sound in Speaking Dynamically Pro.  
    Go into design mode and choose Speaker Volume... from the Dynamic Boards menu. Make sure No Separation Use Volume Settings Below is selected, and then make sure Normal Sounds is not set to Mute.
    [2009-12-24] 
    How do I program my Mercury’s remote control?  
    SolutionOpen the Mercury Control Panel by clicking its name (it might instead show the battery life) on the Taskbar, next to the green Start button. Then click on the Setup button to go to the setup window.
    [2009-12-24] 
    The IR commands that I sent to LEO don't work.  
    Be sure to select the correct cell on the card or in the diagram before recording an IR command. This is particularly important to remember when you are using Learn mode or sending commands directly to LEO.
    [2009-12-24] 
    The IR command I am looking for isn't in the database.  
    Use Learn mode to teach LEO the command from your remote control.
    [2009-12-24] 
    The messages I recorded on a card are cut off.  
    There is a limit to the lengths of recorded messages that LEO can store. You can see what this length is by choosing Message Setup from the Setup menu. For example, if LEO is configured for 12 cards,
    [2009-12-24] 
    Bolod more>> 
    Where can we buy Celvision's displays abroad?  
    Celvision auto stereoscopic display is a brand owned by Celvision Technologies, Ltd. Now we are making our overseas market layout and expecting to set up the sales network in different areas all over the world.
    [2009-12-24] 
    Can you provide the large-sized projection wall?  
    Of course we can. The world's largest autostereoscopic display (103-inch) is created by Celvision. We can also manufacture the even larger 3D projection wall (e.g. 180-inch), if the clients specially order it.
    [2009-12-24] 
    Can more than one person see stereoscopic?  
    Yes, there is no limit for multi-viewers to see stereoscopic images simultaneously. But you should locate at the effective view-region in front of the screen.
    [2009-12-24] 
    What is the best view angle and distance ?  
    Celvision™s display has a very wide view angle (up to 140 degrees). The perfect distance of the viewer from the display is different with different size of display screen. For details, please refer to our product manual.
    [2009-12-24] 
    Is there any assisting device?  
    No. Basically, you need not any devices (such as glasses or helmets) to assist you. For Celvision™s 3D display is using a technique named âœfree viewingâ, which makes the viewers enjoy the scenery
    [2009-12-24] 
    Quest3D more>> 
    What’s the different between each Quest3D edition?  
    Please look here: http://www.quest3d.com/index.php?id=5 for more information.
    [2009-12-24] 
    What about support?  
    A valid license provides free access to the Quest3D forum, WIKI, support files and software updates. The excellent updates of Quest3D offer many new features and improvements and can be downloaded free of charge.
    [2009-12-24] 
    What are the costs?  
    Quest3D comes in three editions. Each edition is priced differently. Price can be found on the Quest3D web page or you can ask your local reseller. You need a license for each seat
    [2009-12-24] 
    Why should I use Quest3D and not product X?  
    Quest3D has its innovative interface allows users to create applications using a visual approach to programming. This improves both speed and the ability to harness creativity. Quest3D offers a unsurpassed feature
    [2009-12-24] 
    What can be imported?  
    Quest3D imports polygon geometry, skinning (up to 4 weights per vertex), vertex colors, multiple texture coordinates, textures, animations, cameras and lights. When you use a .x exporter that exports
    [2009-12-24] 
    NVIS more>> 
    How does a see-through HMD work?  
    See-through head-mounted displays are used in a subset of Virtual Reality applications called Augmented Reality, or AR. AR allows users to see virtual images superimposed or blended with their physical environment
    [2010-1-15] 
    How do I get started using Virtual Reality?  
    Head-mounted displays are often thought of as the main technology behind virtual reality. In fact, it's just one of many critical components. Most virtual reality software developers start
    [2010-1-15] 
    How do these products work?  
    Most virtual reality displays work on similar principles. They magnify and refocus images from one or more small displays to immerse the user into a virtual environment
    [2010-1-15] 
    What comes with an NVIS Virtual Reality Display?  
    All NVIS VR displays come with a display unit, a video control unit, and necessary accessories including power cord, video cable, adapters, and a user manual
    [2010-1-15] 
    How long are the cables from the display to the control unit?  
    The cable length from the HMD or HHD to the VCU is approx 15 feet in most NVIS units.
    [2010-1-15] 
    RealD more>> 
    Do you have a cable that I can use to do that?  
    I have to run my E2 emitter approximately 30 feet from the computer. Do you have a cable that I can use to do that? We have a kit called the VESA extension cable kit.
    [2010-1-19] 
    I have an EPRO or ELR emitter from an older system .  
    You have two issues that you need to address: the cabling and the voltage supply. The EPRO emitter was designed to operate on 12 VDC. The newer graphics cards usually put out only 5 VDC per the VESA (3 pin mini din) standard
    [2010-1-19] 
    I have an ESGI emitter from an older system.  
    You have two issues that you need to address: the cabling and the voltage supply. The ESGI emitter was designed to operate on 12 VDC. The newer graphics cards usually put out only 5 VDC per the VESA
    [2010-1-19] 
    Error messag: my graphics board is not configured for stereo.  
    Most likely, the stereo option has not been enabled in your card’s driver, or you are running at a resolution that is not supported in stereoscopic mode by your card.
    [2010-1-19] 
    Is there a test program I can use to confirm?  
    There is a diagnostic utility you can download that will confirm proper system stereo support as well as help determine if E-2 is working properly. Please contact Professional Sales and Customer Support at pro-sales@reald.com.
    [2010-1-19] 
    AeroScout more>> 
    What kind of experience does AeroScout have?  
    AeroScout invented the industry's very first Wi-Fi-based Active RFID tag back in 2003, and currently leads the market in number of tags shipped. Our customers include many Fortune 500 organizations
    [2010-1-22] 
    Can AeroScout integrate with enterprise applications?  
    Yes. AeroScout MobileView provides a standards-based API with dozens of functions, through which users can integrate a wide variety of data – from basic asset information and location data to complex categorization
    [2010-1-22] 
    Can you track additional sources of data?  
    Yes. Our tags have several sensors built-in or optional, and can connect to multiple sensor and telemetry sources to send status data wirelessly. In addition
    [2010-1-22] 
    What kind of battery life can I expect?  
    AeroScout offers the best battery life in the Wi-Fi tag industry, over 4 years in typical conditions. A built-in motion sensor on all tags enables users to reduce tag transmission frequency when the tags are not in motion.
    [2010-1-22] 
    Can you track things indoors and outdoors? Is there a difference?  
    The AeroScout system can track assets indoors, outdoors, or in mixed indoor/outdoor environments. Radio signals perform differently indoors versus outdoors, so different location determination algorithms must be used.
    [2010-1-22] 
    DDD more>> 
    How do I view these in 3-D using TriDef Media Player?  
    If you have a left-right side-by-side or above-below .avi, you should be able to play these in TriDef Media Player by simply naming the file according to the TriDef naming conventions.
    [2010-3-9] 
    Why do some media files or DVDs not playback smoothly?  
    Please ensure your system meets the requirements for playback of the media file. Your system may not be capable of playing the selected 3-D Media in its current configuration.
    [2010-3-9] 
    Why does the 3-D effect look wrong?  
    If you are playing a 3Di DVD the field order may be set incorrectly. Switch the DVD Input Type to either L+R or R+L using the "D" key. The 3-D Settings may be too extreme for comfortable viewing.
    [2010-3-9] 
    Why does the image not appear to be in 3-D?  
    Your 3-D Display may not be configured correctly - please refer to Troubleshooting You may be in 2-D Mode. Press the "3" key
    [2010-3-9] 
    How do I change my DVD region?  
    DVD region codes are used to restrict playback of certain discs to a particular geographical region. Your DVD-ROM drive must be set to the appropriate region in order to play the DVD.
    [2010-3-9] 
    DTI more>> 
    Where can I find the latest NVIDIA 3D drivers?  
    NVIDIA 3D Stereo brings stereoscopic 3D support to our whole family of TNT™-, GeForce™-, and Quadro™-based graphics cards running games developed with Direct3D® and OpenGL® APIs without requiring special versions of games.
    [2010-3-11] 
    Can I use your display with Sun workstations?  
    Not at the current time. Sun adopted a proprietary stereo resolution (960x680), with a fixed refresh rate (112 Hz). We are working with Sun to ensure that their future products are supported.
    [2010-3-11] 
    I use shutter glasses. Can I use your display?  
    If your platform can be configured for stereo at a resolution of 1280x1024 or 1024x768, with a 60 Hz stereo refresh rate, then any DTI display should work fine.
    [2010-3-11] 
    Do you support SGI Workstations?  
    We fully support "new-style" stereo. "Old-style" stereo can be supported if your stereo application can be configured to not display the "dead area" required for shutter glasses.
    [2010-3-11] 
    Do I have to keep my head in a single position to see stereo?  
    No. One has a few inches of space in which to move laterally and several inches front and back. In addition, you can move several feet up and down (limited only by the off axis visibility characteristics of the LCD).
    [2010-3-11] 
    NVIDIA more>> 
  • 此栏目下没有
  • Liteye more>> 
    How do you  return product to Liteye for credit?  
    Liteye Systems, Inc. has a 15 day return policy on all HMDs. If for any reason you wish to return your HMD during those first 15 days please call our tech support line at 720-974-1766, Monday through Friday, 8AM to 5PM MST.
    [2010-3-31] 
    What are the assembly standards for Liteye products  
    All Liteye controller boards and cable assemblies are compliant with the "Restriction of Hazardous Substances Directive" (RoHS) Initiative 2002/95/EC.
    [2010-3-31] 
    What is the Pixel Quality Specification of Liteye products  
    No more than one sub pixel out per pixel (Touching sub-pixels in RGB order within row.) No more than 2 adjacent sub pixels out.
    [2010-3-31] 
    What is the Mean Time Between Failure of the OLED  
    Most Liteye products utilize a OLED display and it is the display with the shortest MTF, therefore we usually refer to the display when classifying our products.
    [2010-3-31] 
    What type of user input capabilities via custom firmware  
    The following firmware options are possible, depending on the HMD and cable selected:Luminance control,Red / Green / Blue brightness control (good for hue matching)
    [2010-3-31] 
    NaturalPoint more>> 
    What if video is not working for a OptiTrack V100 camera?  
    First, try to make sure the OptiTrack camera is on its on USB EHCI controller.Then, if video is still not displaying, and you suspect USB bandwidth to be the cause, you can adjust the SceneAV camera's properties
    [2010-5-20] 
    What configuration provides the best bandwidth  
    Make sure USB video sources are on their own USB EHCI controller, this will isolate their bandwidth consumption from cameras capturing mocap data. You review this by checking the camera connection tree in the Arena/Expression Asset window, or the Windows Device manager using view by connection).
    [2010-5-20] 
    What format does Scene A/V record to?  
    Scene A/V records to motion jpeg with an AVI wrapper which includes audio. Audio is recorded uncompressed at the sampling rate of the source device (configured in the OS and/or DirectShow source filter's property page).
    [2010-5-20] 
    How does Scene A/V sync video data  
    OptiTrack V100 cameras are capable of recording at 25, 50 and 100 FPS. These images are synced with the Motion Capture data using the existing OptiTrack sync cable.
    [2010-5-20] 
    What are the benefits of using a OptiTrack v100  
    Using a calibrated V100 camera allows reconstructed 3D markers to be correctly reprojected onto scene video.
    [2010-5-20] 
    eDimensional more>> 
    Does the force feedback hurt?  
    Absolutely not! The force feedback is similar to the sensation you notice when sitting in a big movie theater with big surround sound speakers and lots of bass.
    [2010-4-21] 
    Can I use the microphone on the AudioFX for online chat?  
    Absolutely, the microphone works perfectly with applications such as Skype, Google Talk and other online chat programs.
    [2010-4-21] 
    Can I use the AudioFX on my game consoles?  
    At this time, both AudioFX models are designed primarily for the PC. It is possible to connect the standard AudioFX to your TV audio analog out and send the TV audio through the headset.
    [2010-4-21] 
    Can the AudioFX headsets be used for movies?  
    Absolutely. The same features that make the AudioFX great for gaming also make for a great movie and music listening experience on your PC.
    [2010-4-21] 
    What is the difference AudioFX and AudioFX Pro 5+1?  
    The original acclaimed AudioFX introduced our unique force feedback feature within a headset catering specifically to gamers. The clear positional sound, comfortable design and flexible noise-canceling mic.
    [2010-4-21] 
    Instant Effects more>> 
    Can I use languages where text flows right-to-left?  
    Presenter supports this option when Bitmap Text is enabled in the Prefs page of the main FXEdit screen. Since there are some additional constraints imposed by bitmap text.
    [2010-4-29] 
    Can I include Chinese characters in my presentation?  
    Yes, but you must use fonts that support double byte characters.
    [2010-4-29] 
    Can I use video backgrounds with Presenter?  
    Yes. Add a Video Insert Scene to all slides of a presentation and push that Video Insert Scene behind the PowerPoint content. Here are the steps. Add the Standard Default Video Insert scene to any slide.
    [2010-4-29] 
    How do I get more color control for my text?  
    In Options / Colors you have the option to allow either the FXTheme or PowerPoint to control colors for all varieties of content. There are 3 classes of text.
    [2010-4-29] 
    Why does my text change positions?  
    Presenter is a full time 3D application. It extracts your 2D PowerPoint content and puts that into its own 3D scene. In certain themes, that scene is designed to fit in with other 3D design components.
    [2010-4-29] 
    CyberWorld more>> 
    What is your return policy?  
    We have a 15 day return policy effective upon delivery with a 15% restocking fee. The purchaser is responsible for all shipping charges incurred. All products are tested before shipping to guarantee non DOA (dead on arrival). Manufacturers warranty is applicable after the 15 day return period. Please feel free to ask about specific product warranties or returns.
    [2010-5-14] 
    Can you ship to someone as a gift from me?  
    Yes, only if payment is made by certified check or money order.
    [2010-5-14] 
    Where do you ship to?  
    Worldwide.
    [2010-5-14] 
    How much are shipping charges?  
    We quote on shipping method and applicable charges when verifying your order. FOB/FCA.
    [2010-5-14] 
    How are orders shipped?  
    Fedex, UPS, and Postal. Method is confirmed when you verify your order. Orders are shipped immediately upon payment. FOB/FCA. Delivery times are dependant upon method of shipment and customs delays if any.
    [2010-5-14] 
    Oculon more>> 
    How to store the Oculon H.M.D.?  
    Kindly refer to the user’s manual for detailed information. Keep this device in a manner that you normally do for your digital camera. Never expose this device into direct sunlight. Keep away from a place where there is too much moist or dirt.
    [2010-6-11] 
    Will it cause overheating for a long period of time?  
    The Oculon H.M.D. uses the latest LCoS optical technology and CMOS Sensor with a low voltage of 3.3V/DC, and with power saving capability. There will not be any overheating if you use this device properly. The device supports up to 50 degrees centigrade in temperature.
    [2010-6-11] 
    Is the Oculon H.M.D. recommend for long hour use?  
    This will depend on each individual since not all can endure on focusing on the screen for a long period of time. Using the H.M.D. is much like when you are watching a movie in a theater that could last for 3 hours; thus we recommend you to take frequent breaks and do not use this device for more than what your body can handle.
    [2010-6-11] 
    Can we connect the HMD-F320B into the computer?  
    HMD-F320B uses standard composite connections as well as video input only; thus is not compatible with PCs that requires PC VGA input.
    [2010-6-11] 
    Is there any effect of Bordered Rainbow Efficiency?  
    Oculon H.M.D. uses the latest LCoS optical technology and embeds R.G.B. (the 3 elements in color definition) directly onto the CMOS sensor; thus has no side effect unlike other technologies that use separate RGB sensors and utilizes optical lens to form the focus.
    [2010-6-11] 
    Solutionix more>> 
  • 此栏目下没有
  • Prefactor more>> 
  • 此栏目下没有
  • Visual Components more>> 
  • 此栏目下没有
  • 0-360 more>> 
    What is the warranty on the 0-360 Panoramic Optic?  
    We are so proud of the 0-360 Panoramic Optic that we guarantee it for life! The 0-360 has no moving parts. So, with proper care, it should last forever. Be sure to read the warranty card for the typical disclaimers
    [2010-6-8] 
    Is the 0-360 fragile?  
    The 0-360 Panoramic Optic was engineered to be as rugged and durable as possible. The mirror and see-through window are thick, strong glass. The hardware is rugged aluminum. Like all optical instruments, you do not want to drop it, and we recommend that you handle it with due care.
    [2010-6-8] 
    Are there any extra costs, like per-image fees?  
    Once you purchase the Optic, you can produce as many virtual tours as you wish. There are no other fees.* We will continue to provide free updates to the UnWrapper software. We try to keep this as simple and easy as possible. *Our latest software has an optional uploading feature, which would require an additional programming charge, to integrate the software with your web server.
    [2010-6-8] 
    Can I add my logo to the viewer?  
    If you use PTViewer, you can easily add your own logo to the viewer, for free. It is as simple as replacing the "wait.gif" file with your own.
    [2010-6-8] 
    Can I create a Flash-based tours from the 0-360?  
    There are several utilities available that will allow you to display virtual tours in Flash format.
    [2010-6-8] 
    Solido more>> 
    May I print molds?  
    Yes, you can print any kind of mould with SD300 Pro and inject silicon based materials to obtain the parts. Moulds are strong enough to allow the injection of several parts.
    [2010-5-24] 
    What happens if my STL file contains errors?  
    SDView automatically checks and fixes all imported STL files to detect any open surfaces, double triangles etc.. If the geometry cannot be repaired, a warning message will appear.
    [2010-5-24] 
    Can SD300_Pro be shared on a local net?  
    Yes, the printer can be shared on the network. Every user can prepare his files and place them in the printing queue.
    [2010-5-24] 
    How long does it take between two consecutive prints?  
    The stop time of the printer before to start a new printing is of few seconds, just the time to remove the part from the printer table.
    [2010-5-24] 
    How long does it take to replace a Material KIT?  
    The complete replacement of the KIT (composed of PVC roll, glue cartridge, anti-glue cassette and anti-glue pens) is an easy operation that takes just few minutes.
    [2010-5-24] 
    PrimeSense more>> 
    Can the PrimeSensor distinguish the hand of a person?  
    PrimeSense solution includes two components: a depth acquisition component (the Reference Design) and a depth processing component (the NITE middleware).
    [2010-6-22] 
    Is 3D technology capable of detecting the nuances  
    The answer depends on the distance of the person from the PrimeSensor. At 1m away the resolution is fine, and human face features are clearly visible in the depth image.
    [2010-6-22] 
    What is the key different game experience  
    The Wii system is a 6 Degrees of Freedom (DoF) system: the Wii mote supports 2 points with 3 DoF. The PrimeSensor has VGA resolution, meaning 640x480 points, where each pixel is a 3D data point – totaling over 300,000 DoF.
    [2010-6-22] 
    What is the eye-safety level of the PrimeSensor?  
    The PrimeSensor is a class 1 laser device and has been certified by independent
    [2010-6-22] 
    What is the PrimeSensor depth acquisition technology?  
    PrimeSense technology for acquiring the depth image is based on Light Coding™. Light Coding works by coding the scene volume with near-IR light. The IR Light Coding is invisible to the human eye.
    [2010-6-22] 
    Reallusion more>> 
    I have no video on screen after running CrazyTalk.  
    I have no video on the screen after running CrazyTalk for Skype.
    [2010-7-26] 
    I have got sound feedback.  
    This usually happens when your microphone is positioned too closely to the speaker. You can avoid this by clicking off the microphone when audio is playing.
    [2010-7-26] 
    changes are not being reflected immediately  
    The sound from your microphone does not transfer to your speaker; Therefore, the mixer setting will not be reflected on your side. However, the adjustment will definitely take effect on the other side of the conversation.
    [2010-7-26] 
    Where will my avatar be located after installation?  
    After installation, the content you have bought will automatically be settled in the folder: C:\Documents and Settings\(Your Login ID)\Application Data\Reallusion\CT4Skype\(Your Skype ID)\MyAvatar
    [2010-7-26] 
    What is the best setting for Desktop Sharing?  
    According to the real-time video base sharing, your internet bandwidth and computer CPU resource are necessary to be taken into account.
    [2010-7-26] 
    IST more>> 
    Do I really need to subscribe to the Maintenance  
    The Maintenance and Subscription Program is a voluntary program that is included without charge for the first year. Renewals are optional and can be discontinued at anytime.
    [2010-8-3] 
    don't I lose the flexibility of modifying my software  
    Emphatically NO. (sorry...didn't mean to shout but we feel strongly about this:-) The MotionMonitor® actually enhances client flexibility.
    [2010-8-3] 
    What is the advantage of purchasing software?  
    Commercial applications eliminate the need to program that which has already been done
    [2010-8-3] 
    What is the advantage of purchasing a "system"  
    Hardware, whether optical trackers by NDI's Optotrak or magnetic trackers by Ascension and Polhemus, are all assured of working together with other data acquisition devices on day one
    [2010-8-3] 
    MOTEK more>> 
    Is CAREN Compatible with my current software tools?  
    CAREN software is generating output file formats that can be read directly into MATLAB, SPSS and various other data analysis software packages.
    [2010-8-3] 
    can I integrate and run CAREN in my current setup?  
    Elements like motion capture systems and/or other analogue input devices (Force plates, EMG, EEG and so on) can be easily integrated into CAREN.
    [2010-8-3] 
    Where can I have a "hands on" of CAREN?  
    MOTEK's labs in Amsterdam and Culenborg in The Netherlands are the best place to have hands on work with CAREN in a research settings.
    [2010-8-3] 
    What makes CAREN unique  
    CAREN's unique property is the ability to immerse a person in a multi-sensory experience. The person can for example see and hear how his balance compensation works.
    [2010-8-3] 
    What type of research is done with CAREN?  
    FUNDAMENTAL RESEARCH.Immersive VR that evaluates a subject's behavior and covers most sensory inputs (visual, auditory, vestibular, tactile) in a synchronized environment is a powerful research tool.
    [2010-8-3] 
    tridelity more>> 
    the stereo image looks inverted  
    change the stereo settings like shown in the following picture
    [2010-8-10] 
    can I use the 2D/3D software from TRIDELITY?  
    we would need to change the software but it's possible
    [2010-8-10] 
    What is a sweetspot?  
    In the stereoscopy jargon, the sweet-spot is the place where a correct 3D effect can be visuallized. It's usually given in centimeters from the display and the lengh.
    [2010-8-10] 
    Is Mac and Linux supported?  
    We currently offer the plug-ins for Mac as well but no player right now. TRIDELITY is working on a player for Linux and Mac and it should be available shortly.
    [2010-8-10] 
    How many clients are included in the network edition?  
    One client is included by default. We can offer bundles with 5+ clients as well, please contact us for more information.
    [2010-8-10] 
    VisuMotion more>> 
    Why is my 3D image not working with Windows 7?  
    Windows 7 comes with a new functionality to scale up the whole desktop appearance with all icons, fonts and windows
    [2010-8-12] 
    Why is my license not working ?  
    If the system time was change, e.g. through a BIOS rest, the License Manger needs to verify with our license server that your system time is set back to the correct time.
    [2010-8-12] 
    Supported 3D Displays / devices  
    This modes can be used to drive many other 3D devices which require these common view arrangements.
    [2010-8-12] 
    Why does z.l.i.c.e. not run ?  
    Check if your system meets all our requirements. This error can occure if not the latest Service Pack is installed for your Windows.
    [2010-8-12] 
    Why do I get the error "Unable to access file ..."  
    Under Visa the UAC (User Account Control) must be deactivated to have all access and permissions for z.l.i.c.e.
    [2010-8-12] 
    scienceandmotion more>> 
    Is it possible to place more than one SAM PuttLab?  
    Multiple systems should be placed about 4 meters apart in order to avoid interference between adjacent systems.
    [2010-8-17] 
    Can SAM PuttLab be used under any weather conditions?  
    Due to the employment of modern technology SAM Motion Analyzer hardware components have to be protected from rain and sprinkling water. Stormy winds may impact the measurement accuracy.
    [2010-8-17] 
    Where can I use SAM PuttLab?  
    You can use SAM PuttLab indoors and outdoors, for example for training purposes, without any limitations. Through the implemented power supply in the USB-cable you also can take your exercises outdoors and use a laptop to analyze your data.
    [2010-8-17] 
    Does SAM PuttLab provide support for left-handed?  
    since version 2.0 of the PuttWare the stroke detection as well as all the graphics in the reports will also work for left-handed players.The only thing that does not work in left-hand mode are the games.
    [2010-8-17] 
    How easily can I transport the SAM PuttLab-system?  
    SAM PuttLab comes in an easy-to-transport and shock resistant case. The system is ready for daily mobile indoor and outdoor use.
    [2010-8-17] 
    NorPix more>> 
    I have exported to an AVI, but the resulting file size is 0  
    Most common cause : the desired AVI encoding format doesn't support the current image resolution. Each codec has its own requirements
    [2010-9-1] 
    My AVI playback is a little bit slow  
    AVI file format does not support non-integral frame rates. That means that even if your sequence was captured a 25.67 frames/second, the AVI will only playback at 25 frames/second.
    [2010-9-1] 
    My exported AVI frame rate is incorrect  
    The frame rate used in the AVI is the one shown in the StreamPix Sequence toolbar at the exact moment you press "Record".
    [2010-9-1] 
    My exported AVI file seems to skip frames  
    If you exported the AVI from an existing sequence, then the AVI has all the information contained in the sequence. The problem is often file fragmentation which will cause jerky playback.
    [2010-9-1] 
    StreamPix toolbars aren't repainted  
    When those options are used, the image is scaled to fit the window. The algorithm used by windows to do this is slow and gives mixed results.
    [2010-9-1] 
    NewTek more>> 
  • 此栏目下没有
  • ipi more>> 
  • 此栏目下没有
  • Miracube more>> 
    What's the ideal viewing distance and angle for 3D?  
    Viewing angles in 3D mode.
    [2010-10-11] 
    What is the Reverse Function?  
    When watching 3D content on a real 3D monitor, the order of images for left and right eye is of importance for the perception of the 3D effect.
    [2010-10-11] 
    Some pixel spots appear constantly  
    [2010-10-11] 
    The problem don't be solved by pressing the [AUTO] button  
    If a problem cannot be solved by pressing the [AUTO] button (in 2D mode only!), please use the ‘factory reset’ function (OSD MENU>Setup>Factory Reset).
    [2010-10-11] 
    3D is out of focus in subfield mode  
    Some images in subfield mode have a gap between the left and right eye pictures. Due to this gap the 3D image might be out of focus. Please adjust the distance between the images by using the [<] or [>] button
    [2010-10-11] 
    Myvu more>> 
    What is the difference between“Standard”and“Universal”?  
    Myvu Standard viewers and Myvu Universal viewers are the same product with the same compatibility.
    [2010-10-11] 
    What if the battery is not charging or is charging slowly?  
    Verify that the USB cable and all connectors are securely attached. For the fastest charging time, it is recommended that you use the USB cable with a USB wall charger to charge your myvu.
    [2010-10-11] 
    What if the audio is too noisy?  
    If the media player has adjustable volume, try turning down the volume on the Myvu pendant and turning up the volume on the media player.
    [2010-10-11] 
    What if the audio is weak or nonexistent?  
    Verify that all connectors are properly attached. Adjust the volume on myvu’s pendant or adjust the volume on your device.
    [2010-10-11] 
    What if the video is clipped or black bars appear?  
    The viewer is designed to display a video image with a 4:3 aspect ratio in order to match the standard TV image.
    [2010-10-11] 
    InFocus more>> 
    The projector does not display my Mac computer image  
    Make sure your cables are securely seated on the projector and computer.
    [2011-1-17] 
    The projected image only displays the background  
    If you only see a background without any icons, you have Extended Desktop enabled. This means that half of your desktop will be on your laptop and the other half will be on the projector.
    [2011-1-17] 
    What on my Mac do I need to change  
    Go to Apple Menu > System Preferences > Displays.
    [2011-1-17] 
    Is there a Projector Manager for OS X  
    Projector Manager is not compatible with OS X, and there are no plans to update it. The projector can still be used successfully with OS X without Projector Manager installed.
    [2011-1-17] 
    Where do I download the Macintosh drivers  
    Our projectors do not require special drivers to be used with Macintosh computers. All necessary drivers (display and mouse) are included with your Macintosh operating system.
    [2011-1-17] 
    david more>> 
    Is it possible to scan without background planes?  
    this is possible since DAVID Version 2.2. However, you cannot move the laser by hand, but you need a mechanical laser motion
    [2010-12-13] 
    Can I scan a person that has open eyes?  
    We strongly advise against trying to scan an open eye of a person!! You find important safety-related warnings on every commercial laser device!
    [2010-12-13] 
    How can I scan dark objects?  
    Scanning of rather dark objects is difficult. You might coat the object with a matt paint or a powder.
    [2010-12-13] 
    How can I scan bigger or smaller objects?  
    Theoretically, you can scale the whole setup up or down as far as you want.
    [2010-12-13] 
    My surface is heavily spiked  
    Spikes are often caused by laser reflections at the surface
    [2010-12-13] 
    Spatial View more>> 
    How to save and view an image on your iPhone ?  
    Save the image to a folder on your computer.
    [2010-12-7] 
    How to save and view a video on your iPhone ?  
    Save the video to a folder on your computer.
    [2010-12-7] 
    My video looks bad or does not display in 3D?  
    When transferring the video to your iPod or iPhone, do not select the option Make a version for iphone/ipod .
    [2010-12-7] 
    How to download?  
    Once you have your slide you can go to the provided links to download the video. We recommend that you download the video using your WiFi connection or onto your PC or MAC and then syncing with the device.
    [2010-12-7] 
    What is Sweet Spot?  
    The sweet spot is the distance you are viewing the screen from and the angle which you are viewing the screen at.
    [2010-12-7] 
    Reachin more>> 
    Can HaptX handle this many polygons?  
    the HaptX Engine is very efficient. HaptX has been used to touch-enable models consisting of over 500 000 polys without losing realtime framerates.
    [2010-12-3] 
    What performance penalty could I expect?  
    Rendering ForceModels is very cheap, while HaptX SurfaceModels require a little bit more CPU time
    [2010-12-3] 
    Is it possible to combine objects with HaptX  
    when using HaptX it is possible to combine physics engines and the interaction of Touch Controllers
    [2010-12-3] 
    What language is HaptX written in?  
    HaptX is written in C++.
    [2010-12-3] 
    Would it be possible to integrate HaptX?  
    HaptX utilizes the same model and texture resources as the graphics engine and can be integrated into both OpenGL and DirectX applications.
    [2010-12-3] 
    Artec more>> 
    How exactly does the scanner work?  
    The scanner has a flash bulb and a camera. The bulb flashes a light pattern onto the object and the camera records this pattern.
    [2010-12-6] 
    What’s the set up?  
    That’s one of Artec’s advantages. The set up is simple. You unpack the scanner, plug in the USB cable, plug in the power cable, install the software and you are ready to go.
    [2010-12-6] 
    How difficult/easy is post-processing?  
    depends on what you want to do. Recently we were asked to scan a 16-foot (5 meter) statue of David for a museum.
    [2010-12-6] 
    Can the scanner capture color?  
    Check out the Artec MHT scanner.
    [2010-12-6] 
    What limitations does the Artec scanner have?  
    Like all technology, Artec technology has its benefits and drawbacks. Like most 3D scanners, ours often has trouble scanning human hair, scanning overly black objects, sharp edges (like a blade of a knife) and scanning in direct sunlight
    [2010-12-6] 
    JVC more>> 
    How do I set clock on my KD-S15 unit?  
    The way of set clock on the KD-S15 unit.
    [2011-9-9] 
    How to turn off the ‘DEMO’ on my KD-S15 unit?  
    The way of turn off the ‘DEMO’ on my KD-S15 unit.
    [2011-9-9] 
    What Size SD card can I use in my KD-S100?  
    The KD-S100 has been tested and works with SD cards up to 2GB.File format must be FAT. It will not work with file format FAT32.
    [2011-9-9] 
    How do I change the faceplate color?  
    The way of change the faceplate color.
    [2011-9-9] 
    How do I set the preset radio stations?  
    The way of preset radio stations.
    [2011-9-9] 
    Trivisio more>> 
    Problems with Magnetometers, what can I do ?  
    Pay attention to any ferro magnetic metal in the surrounding. This could be for example table-legs. Recommended is a distance of >1m.
    [2011-3-29] 
    Is there any help for the SDK?  
    There's a README.txt file in your installation directory, providing the neccessary information for the SDK.
    [2011-3-29] 
    Where do I find the source code of the examples?  
    They are store in your installation directory
    [2011-3-29] 
    I cannot see anything in the GUI  
    Please update to new firmware 1.5 or higher and new software 2.1 or higher. If for some reasons you must stay with old versions,
    [2011-3-29] 
    I cannot see anything in the GUI (Firmware 1.5).  
    Try to enable orientation
    [2011-3-29] 
    Excptional 3D more>> 
    What are the viewing distances for your 3D displays?  
    The viewing distances for your 3D displays.
    [2011-7-7] 
    How does the system work?  
    Exceptional 3D displays use specially designed lenses and content to achieve the 3D effect.
    [2011-7-7] 
    How does display receive and playback content?  
    All Exceptional 3D displays require a computer for playback of 3D content.
    [2011-7-7] 
    Can I still watch 2DVideo on an 3D display?  
    All Exceptional 3D displays are capable of playing back standard 2D content.
    [2011-7-7] 
    Can Exceptional 3D retrofit existing LCD?  
    3D lens overlay is specific to each display manufacturer.
    [2011-7-7] 
    Maxon more>> 
    Is there any easy way to delete unused points?  
    Select all the points in your model (Edit / Select All) Then go to Functions / Optimize.
    [2011-12-16] 
    How do I use the Polygon Reduction tool?  
    Make the Polygon Reduction object a Child of the polygon mesh in the Object Manager.
    [2011-12-16] 
    I can't seem to unhide the polys.  
    You cannot currently unhide polygons hidden using this option.
    [2011-12-16] 
    Is there any way to lathe around an axis?  
    You can, however, rotate the finished lathe to assume a position along any of the axis.
    [2011-12-16] 
    How can I make my imported object editable?  
    When an OBJ object or any other file format is imported, the model already contains polygonal information and thus has been made editable.
    [2011-12-16] 
    VMSENS more>> 
    Where can I get more detailed technical information  
    Please check your CD-ROM deliver with your Motion Tracker.
    [2012-2-24] 
    What can I do if there are influence of metals?  
    The VMSENS provided a magnetic field calibration routine to correct for hard and soft iron effects.
    [2012-2-24] 
    What is the influence of metals on Motion Trackers  
    Strong electrical currents/ RF/ Metal can influence the accuracy of the orientation measurement, if the distance between the wires and the Motion Tracker is more than a few centimeters there are not significantly influence the Motion Tracker.
    [2012-2-24] 
    What is meant with 'no drift' on the 3D orientation?  
    The VMSENS Motion Tracker uses multi-inertial sensors to estimate the orientation.
    [2012-2-24] 
    Are the VMSENS compatible with Linux?  
    The C++ library low level communication protocol, can be compiled for Linux as well.
    [2012-2-24] 
    Genustech more>> 
    What Upgrades and Options are Planned?  
    One promise is that all rigs will be upgradable, so you can rest assured that even if you buy a rig now our future options will still fit.
    [2012-7-25] 
    This is a budget rig, how do I monitor my 3D?  
    I strongly recommend Transvideo’s range of highly portable 3D monitors. These have an excellent range of features and are excellent tools for serious S3D production.
    [2012-7-25] 
    Why is the reflected camera mounted below the mirror?  
    This rig is optimised for use with lower cost cameras.
    [2012-7-25] 
    Is the mirror delicate?  
    The mirror is made from optical grade white water clear glass, so drop it and it will break.
    [2012-7-25] 
    Can I zoom with it?  
    It’s a pretty nasty effect and probably best avoided if you can. Best to shoot one shot, then re-frame and shoot the next which is easy enough to do.
    [2012-7-25] 
    More3D more>> 
    There is no stereoscopic effect. What can I do?  
    For a general functionality check more3D added a small test-program to moreStereoDX/GL. You will find it always in the moreStereoDX/GL installation directory.
    [2012-7-27] 
    In-App Control Panel does not become visible  
    moreStereoDX/GL integrated it's in app control panel into the actual visualisation calculation of the application. It is becoming part of it.
    [2012-7-27] 
    Is any special graphics board needed for DX/GL?  
    moreStereoDX/GL is enabled to work with any graphics board supporting Shader Model 2.0 and Direct-X 9.0.
    [2012-7-27] 
    How is moreStereoDX different from the nVIDIA?  
    moreStereoDX/GL supports dual multiple output devices and is aimed at professional users, who use the benefit of 3-D stereo for actual productive application
    [2012-7-27] 
    Which Applications do work with moreStereoDX?  
    In general all DirectX 8,9 and openGL applications.
    [2012-7-27] 
    Advanced Search 
    Picture News more
    Toward left trundle
    Toward right trundle
    ©2008 China SouVR Co., Inc. All information contained herein applies to non-China-client only. Please see our Privacy Policy
    and Legal Terms and Conditions. For China-client information go to SouVR.com.