"FogScreen immediately nailed it! Already on the first day of operation, the reactions from the shoppers varied from amazement to enchantment. This is a wonderful add-on to increase the customer flow to The Catwalk. A premium solution to a premium site", enthuses Henry Sukari, the Managing Director of Ideapark Shopping mall.

OK, make the long story short and to the point.

1. NVIS NVISor SX111
Professional Virtual Reality Displays

NVISor SX111 wide field-of-view head-mounted display, featuring dual SXGA displays with 76Hx64V degrees FOV per eye, total of 111 degree FOV.

2. INFITEC Stereo Projection System
INFITEC=interference filter technology

Since different data formats exist for the representation of stereoscopic content, consulting with regard to the required and reasonable effort for the configuration of the complete system is also part of our business activity. In addition, with special software, INFITEC stereo display technology can provide also complete 3-D solutions to programs built on DirectX.

3. FogScreen R-Series Projection Screen
First specialty walk-through projection screen for retail and digital signage

FogScreen Inc.'s retail product provides retailers with the ultimate projection screen for attracting and holding the attention of shoppers. Not only does the new FogScreen® R-Series projection screen allow shoppers to walk-through and physically interact with videos and logos moisture-free but it can also be configured as a touch screen where high-impact images literally float in the air.

FogScreen® projection screen world premiere occurred in October 2002 at the Turku Science Fair in Turku, Finland. Volume production of the FogScreen Inia projection screen started in late 2004. The interactivity add-on debuted in June 2005, and the 1-meter FogScreen, FogScreen Pro, was launched in April 2006.

All the important principles of FogScreen technology are patented. The basic components of the screen are a laminar, non-turbulent airflow that remains thin, crisp and protected from turbulence. The fog is made with ultrasonic waves and ordinary tap water - no chemicals are needed. It feels dry and cool to the touch.

After the screen is formed by the fog, images can be projected onto it. The FogScreen projection screen can be translucent or fully opaque. It works very much like any ordinary screen in terms of projection: The image is spectacular in normal daylight, but the darker the room the better the results.

Say goodbye to conventional projection technology!

TOP

Hot picture news »

SouVR 3D/VR  Say Goodbye  It Is A Good From Eye to  Two Printers