※Product Overview※

Inertial Measurement Units (IMU)

IMU-P is a new generation of compact size (39 x 45 x 22 mm), low weight (70 gram) and high performance Inertial Measurement Unit (IMU).

It contains 3 highly accurate Advanced MEMS gyroscopes and 3 ultra high performance accelerometers.

The IMU-P is factory fully calibrated and compensated over its operating temperature range.

IMU-P is a cost effective ITAR-free solution for systems that only had FOG's as an alternative when reaching for the performance level that IMU-P can offer.

Key Features
• ITAR-free
• Same mechanical & electrical interfaces as STIM-300
• Affordable price
• 1 deg/hr gyroscopes Bias in-run stability
• 0.005 mg accelerometers Bias in-run stability
• 0.08 deg/√hr Angular Random Walk (ARW)
• 0.015 m/sec/√hr Velocity Random Walk (VRW)
• Advanced, extendable, embedded Kalman Filter
• Full temperature calibration of all sensing elements
• up to 2000 Hz data rate
• Environmentally sealed (IP67)

Applications
Antenna and Line of Sight Stabilization Systems, Passengers trains acceleration / deceleration and jerking systems, Motion Reference Units (MRU), Motion Control Sensors (MCS), Gimbals, EOC/IR, platforms orientation and stabilization, GPS-Aided Inertial Navigation Systems (INS), Attitude and Heading Reference Systems (AHRS), Land vehicles navigation and motion analysis, Buoy or Racing Boat Motion Monitoring, UAV & AUV/ROV navigation and control.

Performance